We have accumulated rich R&D experience, manufacturing experience, technology accumulation, modern management concept, and good reputation in the homebrew fermentation heater, underfloor heating wire, right angle cartridge heater industry. We are implementing three strategic initiatives of scale, platform and specialization, and aiming at four strategic goals of finance, market, management and society. We implement the management culture of 'people-oriented, science and technology leading', and are committed to providing better products and more intimate services for global consumers。 On the basis of fully absorbing foreign technology, we rely on science and technology for development.

Description

Cast Copper Heating Element is constructed by winding a nickel-chrome resistance

Precautions for the use of cast aluminum electric heaters:

1. The working voltage shall not exceed the rated value; the relative humidity of the air is not large, and there is no explosive/explosive and corrosive/corrosive gas.

2. The wiring part is placed outside the heating layer and the thermal insulation layer, and the shell should be grounded; avoid contact with corrosive/corrosive, explosive/explosive media, and moisture; the lead wire should be able to withstand the temperature and heating load of the wiring part for a long time. Avoid excessive force when tightening.

3. The metal casting heater should be placed in a dry place. If the insulation resistance is lower than 1MΩ due to long-term storage, it can be baked in an oven at about 200 degrees Celsius for 5-6 hours, and it can return to normal. Or reduce the voltage and energize until the insulation resistance is restored.

4. The metal casting heater should be well positioned and fixed. The heating area needs to be closely attached to the heating body, and empty burning is strictly prohibited. When dust or pollutants are found on the surface, it should be cleaned up and reused in time, so as not to affect the heat dissipation and shorten the service life.

5. The magnesium oxide powder at the outlet end of the electric heating tube can avoid the infiltration of pollutants and moisture in the use site, and prevent the occurrence of electric leakage accidents.

When ordering, please provide:

1. Specific size requirements: length (mm) * width (mm); diameter (mm) * Height (mm)

2. Use voltage: 380V, 220V, 110V, 36V. . . etc., customized according to customer needs

3. Power: we generally do it according to a square centimeter of 2.5-3.5W.

Main uses: Widely used in plastic machinery, molds, cable machinery, alloy die-casting machines, pipelines, chemicals, rubber, petroleum, and other equipment.

Other Production Pictures

Packing and shipping

Customized Service Contact information, please kindly see below:

With responsible good quality method, good status and excellent client services, the series of solutions produced by our company are exported to lots of countries and regions for 220V Laboratory Digital Thermostat Stainless Steel Hot Plate. Under the core values of "integrity, modesty, innovation and dedication", our company relies on clear strategic deployment, perfect governance structure, solid management foundation, and executive operation. While adhering to technological innovation, we continue to promote enterprise system innovation, management improvement and cultural construction.

Hot Tags: copper heating element, China, suppliers, manufacturers, factory, custom, wholesale, warmer heating pad, pipe insert heaters, Electric Band Heaters, distilling heating element, Flixible Ceramic Heater Pads, mica board heater element for warmer

[[ProKeywords]]