Silicon Carbide Rod Heater
Introduction for silicon carbide heating element Silicon Carbide Rod Heater
The SiC electrothermal element is a rod-shaped non-metallic thermoelectric element which is made of high quality green SiC as the main raw material through processing, high temperature silicification and recrystallization. Compared with metallic electric heating elements, this element has the characteristics of high operating temperature, oxidation resistance, corrosion resistance, long service life, small deformation, convenient installation and maintenance.
When you enquiry, please tell us the following data
D1: Diameter of Hot Zone(mm)
D2: Diameter of Cold Zone(mm)
Le: Length of Hot Zone(mm)
Lu: Length of Cold Zone(mm)
A: Shank Spacing(mm)
Sic heating element Physical properties
Density 2.6-2.8g/cm³
Hardness >9MOH'S
Porosity Rate <30%
Bending Strength >300KG
Tensile Strength >150kg/cm³
Radinacy 0.85
Notice for using silicon carbide heating element
1. Heater should be protected against damp during storing or installing to ensure the performance of the heater.
2. In order to be sure of well-distributed lod of each and groups, heater should be divided before assembling. The tolerance of the resistance of each one cannot exceed by 10% each other.
3. Heater is hard and brittle, please be careful when assembling and maintaining so as to avoid damage.
4. When operating the electric furnace at the beginning, the voltage should be increased slowly and cannot be fully loaded at once. Otherwise the larger current will be resulted in the damage of heater.
5. When heater is damaged and need to be changed, the resistance of new one should follow the increasing resistance. If many are damaged or resistance increased too much, heater should be changed.
Hot Tags: silicon carbide rod heater, China, suppliers, manufacturers, factory, custom, wholesale, fryer heating, CIP Tank Electrical Heater, iron box heating element, straight heaters elements, SIC heaters, face masks machine heater
Send Inquiry
