We always pursue 'reputation first, quality excellence', and have made great contributions to the development and prosperity of the small water heating element, Flanged type bobbin heater, Heating Coil industry. We recognize that the ability to collect and obtain a wide range of knowledge and information is very important. We are also committed to promoting environmental protection and sustainable development, resource conservation and circular economy construction.

Description

Cast Copper Heating Element is constructed by winding a nickel-chrome resistance

Precautions for the use of cast aluminum electric heaters:

1. The working voltage shall not exceed the rated value; the relative humidity of the air is not large, and there is no explosive/explosive and corrosive/corrosive gas.

2. The wiring part is placed outside the heating layer and the thermal insulation layer, and the shell should be grounded; avoid contact with corrosive/corrosive, explosive/explosive media, and moisture; the lead wire should be able to withstand the temperature and heating load of the wiring part for a long time. Avoid excessive force when tightening.

3. The metal casting heater should be placed in a dry place. If the insulation resistance is lower than 1MΩ due to long-term storage, it can be baked in an oven at about 200 degrees Celsius for 5-6 hours, and it can return to normal. Or reduce the voltage and energize until the insulation resistance is restored.

4. The metal casting heater should be well positioned and fixed. The heating area needs to be closely attached to the heating body, and empty burning is strictly prohibited. When dust or pollutants are found on the surface, it should be cleaned up and reused in time, so as not to affect the heat dissipation and shorten the service life.

5. The magnesium oxide powder at the outlet end of the electric heating tube can avoid the infiltration of pollutants and moisture in the use site, and prevent the occurrence of electric leakage accidents.

When ordering, please provide:

1. Specific size requirements: length (mm) * width (mm); diameter (mm) * Height (mm)

2. Use voltage: 380V, 220V, 110V, 36V. . . etc., customized according to customer needs

3. Power: we generally do it according to a square centimeter of 2.5-3.5W.

Main uses: Widely used in plastic machinery, molds, cable machinery, alloy die-casting machines, pipelines, chemicals, rubber, petroleum, and other equipment.

Other Production Pictures

Packing and shipping

Customized Service Contact information, please kindly see below:

We are a professional company which is specialized in research and development, production and sales of Copper Tube Welding Induction Heaters. If you have any interest or requirement of our products, we always welcome you to contact us at any time. We pursue the principles of teamwork and collectivism, and respect labor, knowledge, talent and creativity. We welcome potential buyers to contact us.

Hot Tags: copper heating element, China, suppliers, manufacturers, factory, custom, wholesale, Fin Heating Tubes, Flexible heater, Low Voltage Heater, sheathed heating element, 5V heating element, ir heating elements